Road surfacing standards

These standards set out the requirements for road surfacing on Northern Territory (NT) controlled roads and civil infrastructure.

Technical standards

Bituminous rise and fall

Asphalt mix design register

Applications to register an asphalt mix must be submitted to the Department of Infrastructure, Planning and Logistics.

To apply, read the registration of asphalt mix designs - Technical directive PDF (879.3 KB)

Below are the approved asphalt mixes in the NT.

Registration number Asphalt supplier Suppliers referenceRegion Mix type Registration date Registration expiry
NT-RAMD - 2019-005 Fulton Hogan 151 Darwin Type 5 9/11/2021 9/11/2023
NT-RAMD - 2022-006 Fulton Hogan 152 Darwin Type 4 18/07/2022 18/07/2024
NT-RAMD - 2023-007 Fulton Hogan 154 Darwin Type 2 (A15E) 16/02/2023 16/02/2025
NT-RAMD - 2023-008 Fulton Hogan AC 10 Type 2 – C320 Darwin Type 2 (C320) 16/02/2023 16/02/2025
NT-RAMD - 2022-016 Downer  Type 5 - AC14 A15E Mix Design
Type 5 QLD22-0241
Darwin Type 5 18/10/2022 18/10/2024
NT-RAMD - 2022-017 Downer  NT Type 4 AC20
R22-0190.1-AC20
Darwin Type 4 9/09/2022 9/09/2024
NT-RAMD - 2023-018 Downer  Type 2 H
Type 2H QLD22-0246
Darwin Type 2 2/02/2023 2/02/2025
NT-RAMD - 2023-019DownerType 2 - AC10 - Medium QLD22/0252 C320DarwinType 24/08/20234/08/2025
NT-RAMD - 2022-021Top CoatAS-T3-A20E-2022Alice SpringsTYPE 3 (A20E)9/02/20229/02/2024
NT-RAMD - 2023-022Top CoatAC14HT5-2023Alice SpringsType 514/07/202314/07/2025

Contact

Senior Project Manager – Bitumen
andrew.batson@nt.gov.au
08 8999 4873


Give feedback about this page.

Share this page:

URL copied!